Notes

Tech Notes

SHNs were decoded to wave and Audition 1.0 was used to reassemble
the tracks back to 1 long wave. Audition 1.0 was used to align &
synch the SBD & both AUD sources. Audition 1.0 used to adjust the
volume for the AUD, matrix/CTR and LFE channels. Surcode
CD Pro DTS was used to encode to DTS.
- Mixed by kevtobin@yahoo.com
- FLAC conversion 01-AUG-2006

---------------------------------------------------------
DTS-Audio-CD Info

Front
Left Channel SBD
Right Channel SBD

Center
Mixed to mono -2.5db SBD

Surround
Left Channel -2.5db AUD
Right Channel -2.5db AUD

Sub/LFE
Mixed to mono -2.5db SBD
---------------------------------------------------------
Audio Patching:
1) At the beginning of the show, 35.331 seconds were missing from the sbd source and filled in with audio from the audience. This portion of the audio was normalized to blend in better.

2) Between Cold Rain & Snow and Big River, 34.204 seconds was missing from the aud source and filled in with audio from selected audience crowd noise. This portion of the audio was normalized to blend in better.

3) Between Big River and Friend of the Devil, 10.700 seconds was
missing
from the aud source and filled in with audio from selected audience
crowd
noise. This portion of the audio was normalized to blend in better.

4) Between Friend of the Devil and Cassidy, 10.700 seconds was missing
from
the aud source and filled in with audio from selected audience crowd
noise.
This portion of the audio was normalized to blend in better.

5) Between Cassidy and Must Have Been the Roses, 25.225 seconds was
missing
from the aud source and filled in with audio from selected audience
crowd
noise. This portion of the audio was normalized to blend in better.

6) Between Looks Like Rain and Scarlet Begonias, 20.814 seconds was
missing
from the aud source and filled in with audio from selected audience
crowd
noise. This portion of the audio was normalized to blend in better.

---------------------------------------------------------

More On DTS

Today's audio standards are moving towards multi-channel

sound, like DTS and Dolby Digital. While the Audio-CD

standard (Red Book) hasn't changed to accommodate these

new sound formats, it is still possible to go around the

specification and to put a 5.1 surround recording on a

regular Audio-CD. To play a DTS-Audio-CD you must connect

your DVD/CD player via a digital cable (optical or coaxial)

to your DTS Dolby-Digital receiver. It is not 100% sure

that your receiver will recognize a DTS-Audio CD, so the

first time you're trying to playback a DTS-Audio-CD you

must do a test to determine if it can. Begin with the

volume very low, start the disc and raise the volume

gradually. NEVER listen to a DTS-Audio-CD through the

analog audio outputs of your CD/DVD player.

Burning Instructions

Burn them the absolute same way as you would burn any

normal Audio-CD from FLAC files.